Top 10 Commercial Airframe MRO Providers for Narrowbody Fleets

Commercial airframe MRO providers for narrowbody A320 and 737 fleets, separate from business-jet and engine MRO lists.

Share
November 20, 2026 · ACMI Guide

Top 10 Commercial Airframe MRO Providers for Narrowbody Fleets

Commercial airframe MRO providers for narrowbody fleets perform heavy checks, structural repairs, cabin modifications and related airframe work on Airbus A320-family and Boeing 737 aircraft. Airlines, lessors and ACMI operators buy narrowbody airframe MRO slots when C-checks and D-checks, ageing-aircraft programmes or cabin refreshes take tails out of service. This list covers airline MRO companies and independents with commercial narrowbody airframe depth. It is not another business-jet MRO country page like the top US business jet MRO providers article, and it is not an engine shop list like the top CFM56 engine MRO providers guide.

At a glance

Commercial airframe MRO providers for narrowbody A320 and 737 fleets, separate from business-jet and engine MRO lists.

10 providers Named and compared in the shortlist table below
3 selection tests Applied to every entry, with no invented figures, rates or rankings
6 FAQs Answered at the end of the guide for quick reference

ACMI and wet-lease fleets feel MRO downtime immediately because substitute aircraft are scarce in peak season. Pair heavy-check planning with the wet lease aircraft entry-into-service checklist so induction and post-check return-to-service do not collide. When a check slips, operators look for ACMI cover on the ACMIWORLD marketplace rather than stretching an overdue airframe.

Method

How These Providers Were Selected

  • Public commercial airframe MRO capability on A320-family and/or 737 narrowbodies.
  • Recognised airline-affiliated or independent MRO brand with published airframe services.
  • No invented turnaround times, slot prices or market-share rankings. Aviation Week and provider pages are used only as qualitative evidence of presence.

Shortlist at a Glance

Provider Region focus Narrowbody airframe notes
Lufthansa Technik Global / Europe hub network Major airline MRO group with deep A320 and 737 airframe programmes
ST Engineering Aerospace Asia / global airframe Large airframe MRO network with published A320/737 support
HAECO Asia / Hong Kong and beyond Frequently cited among the largest airframe MRO providers by event volume
AAR Corp North America / global Independent airframe MRO with strong 737 and A320 activity
Delta TechOps United States Airline-affiliated MRO with large narrowbody airframe throughput
Turkish Technic Europe / Middle East / Asia links Airline-affiliated MRO with A320/737 heavy maintenance
SR Technics Europe Independent MRO with commercial airframe and component work
Ameco Beijing China Air China joint-venture MRO with large narrowbody airframe capacity
GAMECO China Guangzhou-based airframe MRO active on narrowbody fleets
Aeroman El Salvador / Americas Large narrowbody heavy-maintenance centre serving US and Latin airlines
Global / Europe hub network

Lufthansa Technik

Lufthansa Technik is a global airline MRO companies reference for A320-family and 737 airframe work, with a wide station and base-maintenance network. Carriers use LHT when they need predictable heavy-check capacity, structural repair depth and cabin modification capability tied to a large material pipeline. For ACMI operators parking European narrowbodies, LHT and its partners are often the first call for scheduled C-checks.

Narrowbody airframe notes: Major airline MRO group with deep A320 and 737 airframe programmes
Asia / global airframe

ST Engineering Aerospace and HAECO

ST Engineering Aerospace publishes extensive airframe services and is regularly ranked among leading global airframe MRO providers. HAECO is frequently cited in industry tallies as one of the largest airframe maintenance providers by tracked events. Together they anchor Asia-Pacific narrowbody airframe MRO for airlines and lessors that base or transit through the region.

ACMIWORLD view: Use them when Asia slots, passenger-to-freighter adjacent work, or high-volume A320/737 lines are the priority.
North America / global

AAR Corp and Delta TechOps

AAR is a major independent North American airframe MRO provider with published airframe programmes and strong visibility on 737 and A320 heavy work. Delta TechOps adds airline-affiliated US capacity with high narrowbody throughput. MRO companies in USA shortlists for Part 121 fleets usually include both an independent option like AAR and an airline-affiliated option like Delta TechOps, depending on whether the buyer wants third-party flexibility or airline-system integration.

Narrowbody airframe notes: AAR Corp: Independent airframe MRO with strong 737 and A320 activity; Delta TechOps: Airline-affiliated MRO with large narrowbody airframe throughput
Europe / Middle East / Asia links

Turkish Technic and SR Technics

Turkish Technic supports A320 and 737 heavy maintenance with geographic reach between Europe, the Middle East and Asia. SR Technics offers independent European commercial airframe and component capacity. Both matter for lessors and ACMI airlines that need alternate European or near-Europe slots when primary OEM-aligned shops are full.

Narrowbody airframe notes: Turkish Technic: Airline-affiliated MRO with A320/737 heavy maintenance; SR Technics: Independent MRO with commercial airframe and component work
China

Ameco Beijing, GAMECO and Aeroman

Ameco Beijing and GAMECO provide large Chinese narrowbody airframe capacity for airlines and lessors operating in or through China. Aeroman in El Salvador is a major Americas heavy-maintenance centre for narrowbody fleets serving US and Latin American operators. These three extend a global A320 737 heavy maintenance providers map beyond Europe and the US majors.

Narrowbody airframe notes: Ameco Beijing: Air China joint-venture MRO with large narrowbody airframe capacity; GAMECO: Guangzhou-based airframe MRO active on narrowbody fleets; Aeroman: Large narrowbody heavy-maintenance centre serving US and Latin airlines

Planning Checks Around ACMI Deployments

Narrowbody ACMI contracts should state who pays for calendar and cycle-driven checks that fall inside the term, who controls slot booking, and what happens if a check overruns. Lessees that assume the ACMI lessor will absorb an unplanned structural finding are often disappointed. Build a maintenance matrix into the ACMI agreement and keep a marketplace ACMI backup if your own metal will be grounded.

For capacity while aircraft are in check, use the ACMIWORLD marketplace. For how ACMIWORLD works with operators, see about ACMIWORLD.

Slot Lead Times and Check Type Clarity

Heavy-check calendars fill seasons ahead for popular A320 and 737 lines. Airlines should separate light visit work from structural C and D checks when they request slots, because hangar days and manpower curves differ. Lessors remarketing mid-life narrowbodies should confirm that incoming lessees inherit a realistic maintenance forecast rather than a surprise grounding in the first lease year. ACMI operators rotating tails through multiple airline customers need especially clear bridging language so a check required by one customer's utilisation does not strand the next deployment.

Material lead times for structural repairs, cabin monuments and ageing-aircraft programmes can exceed hangar availability. Ask shops for bill-of-materials risk on known airworthiness directives for the serial numbers you will send. A cheap slot with long parts delays is not a cheap outcome. Parallel-path critical materials before the aircraft arrives whenever the check content is already known.

Independent Versus Airline-Affiliated Shops

Independent MROs such as AAR and SR Technics often compete on flexibility and third-party access. Airline-affiliated groups such as Lufthansa Technik, Delta TechOps and Turkish Technic compete on system depth, material pipelines and network stations. Many fleets use both: affiliated shops for baseline heavy checks and independents for overflow or region-specific work. Your RFP should state whether dual release, lessor access to records, and on-wing support between visits are required, because those services vary by provider model.

Finally, align MRO contracts with lease return conditions. A narrowbody that leaves heavy check in a condition that fails the next lessor's redelivery clause creates an immediate commercial dispute. Share return-condition extracts with the shop at induction, not at release.

Frequently asked questions

What is narrowbody airframe MRO?

Heavy and base maintenance on the aircraft structure, systems and cabin for types such as the A320 family and 737, as distinct from engine shop visits.

How is this different from engine MRO?

Engine MRO covers shop visits for CFM56, LEAP, V2500 and similar powerplants. ACMIWORLD publishes separate engine MRO listicles.

Why do ACMI operators care about airframe MRO slots?

Because a slipped C-check grounds the contracted tail. Substitution and marketplace cover become the commercial backup.

Are business-jet MRO shops suitable for A320 work?

Usually not. Commercial narrowbody airframe MRO needs different approvals, tooling and hangar capacity. See the separate business-jet MRO list for that market.

Which regions dominate A320 and 737 heavy checks?

Europe, North America, China and other Asia-Pacific hubs all have deep capacity. Slot availability still varies by season and check type.

Should lessors or airlines book the slot?

It depends on the lease. Many operating leases put base maintenance responsibility on the lessee, with lessor approval rights on the shop.

Need narrowbody cover while an airframe is in heavy check?

Start with marketplace ACMI listings.

Browse the ACMIWORLD Marketplace → About ACMIWORLD →